18*12W RGBW 4in1 LED IP65 outdoor linear light dmx rgb led wall washer

Specification

★ DMX512 protocol, Master/Slave mode, Sound Active mode, Auto Run mode,

  Strobe mode.

★ LED display, easy to operate

★ Suitable for Disco, club, bar, DJ etc.

★ DMX channel: 7CH/23CH/72CH

★ Voltage: AC100-240V 50/60Hz

★ Power consumption|: P=155W

★ Light source: 18*12W RGBW 4in1 LED

★ Dimmer: 0-100%linear dimmer

★IP Rating:IP65

Tips for selecting led wall washer lights

Led wall washer lamps, also known as LED linear projection lamps, are mainly used for the lighting of commercial streets, residential areas, and the external wall lighting of hotels... Because led wall washer lamps have the characteristics of environmental protection and energy conservation, gorgeous lighting effects, low power consumption, long service life, etc., in 2013, wall washer lamps of other light sources were gradually replaced by LED wall washer lamps.

1.Degree of protection

This is also an important factor in choosing led wall washer lamps.

Strict requirements should be carried out when selecting. Led wall washer lamps are used outdoors, and the waterproof grade should be above IP65. The protection grade is the best. It is also required to have relevant protection requirements such as pressure resistance and impact resistance, so as to ensure that there is no problem with the waterproof and dust-proof ability of the lamp under the conditions of wind, rain, sun and so on.

2.Control mode

At present, there are two control modes of LED wall washer lamp: internal control and external control.

Internal control means that there is no external controller. The designer designs the control system in the wall lamp, and the degree and effect cannot be changed. External control is an external controller, and its effect can be changed by adjusting the key of the main control. Usually in large-scale projects, customers can change the effect according to their own requirements.

3.LED light source

In order to achieve the desired effect of lighting, it is necessary to pay attention to the different design of different lamp beads in the selection of light sources, and the heat dissipation effect is also different. Of course, the lighting effect is also different. It is impossible to choose some low-grade and low brightness lamp beads to top up in order to save cost. Whether the brightness of an LED wall washer lamp meets the standard depends entirely on the light source.

Difference between LED wall washer lamp and LED line lamp.

Application effect

Led wall washer lamp is to let the light wash the wall like water. The effect here is that the LED wall washer lamp hits the light on the wall, which is similar to the application method of LED projection lamp, but the effect of LED wall washer lamp is more gentle. LED line lights are mostly used to outline the building or make digital screen effect. Of course, they may also be installed in the corner to let the light find the wall, but led wall washer lights are more flexible.

Specifications and parameters

Led wall washer lamps are mostly high-power products, while LED line lamps are mostly low-power products. Because the LED wall washer lamp depends on the irradiation height, there is usually a certain distance from the wall, so the high-power LED wall washer lamp can be more competent. And the LED line light makes the outline, small power is OK. The heat dissipation and waterproof of LED wall washer lamp is more difficult. Drainage and convection design are required. In the production process of LED wall washer lamp, first use the wall washer lamp glue filling machine for glue filling treatment, and then apply glass glue on the glass cover plate to realize structural waterproof.

Product appearance

Many led wall washer lamps have lenses. It is intuitive that led wall washer lamps have brackets, which can freely adjust the angle, meeting their own application requirements.

FAQ

Q1.What is your delivery time?

A:3-5days for sample or small batch orders, 15-30days for mass production

Q2.What is the payment method?

A:T/T,Paypal,WU,Ali Pay.

Q3.How do you guarantee the quality of your products?

A:All Marslite products 100% full test 24hours before goods delivery.

Q4.Are you a factory or a trading company?

A:Manufacturer, with about 100 person in factory.

Q5.Where is your factory?

A:No 195, sandong Road,Huadu Distric ,Guangzhou City, China, very near the Guangzhou Baiyun Airport.

Q6.How long is the product warranty?

A:2 Years Warranty 

Q7.Does your packaging ensure product safety?

A:Marslite will do Drop testing for package to make sure all products is well packed.

Q8.How is your after-sales service?

A:We will give you spare parts and technical support to help you fix the light.