Waterproof Par Light 18x18w RGBWA UV 6in1 IP65 Led Par Light

Technical 

Voltage: AC100-240V 50/60Hz

Rated power: 180W

Lamp quality: 18x18W 6in1 high power led

Dimming: 0-100% linear dimming

Strobe: 1-25Hz electrical strobe with variable speed, pre-programmed random strobe and pulse effects

DMX Channels: 6CH/10ch

Control mode: DMX512, Automatic and Master/ Slave mode  

LCD display: digital display

Maintenance of LED par lights

LED par lighting equipment is a kind of precision electrical equipment, which needs to be operated correctly during use to avoid damage to the equipment. So how is the par light maintained and maintained?

The first point is about LED par light position adjustment:

Because there will be some lamp position shifts or changes in the guest area during use, which will cause the lamp position to change, so the equal position adjustment should be carried out every month, of course, including the computer lights controlled by DMX512 signal.

The second point is the inspection of LED mechanical equipment:

Including the computer light motor, the motor of the color changer, the nozzle of the special effect equipment, etc.

The third point starts the LED par light to check all the lines:

Check whether there are breakpoints, damage, and leakage, because there are inevitably some human factors in the use of the line, there are many unexpected situations, such as the exposed wire is stepped on and broken, the wire that is often plugged and unplugged may have breakpoints, and occasionally Because of the leakage of the line or even the short circuit when the drink is sprinkled, this inspection should be very careful. This check requires weak current to end cooperatively.

The fourth point needs to clean up the dust and waste inside and outside the lamp:

There will be some waste in the use of lighting itself, such as the waste left in the lamp body after the light bulb explodes, and the computer lights and special effects machinery that have been exposed to the audience area for a long time simply fall into some waste, such as ribbons, glass ballast, and drinks. residues, etc. Therefore, it is necessary to wipe clean the waste and dirt outside the lamp, and remove the waste inside the lamp, which requires cleaning cooperation.

The fifth point is to check all fire protection equipment:

Lighting and sound are the most concentrated types of work in the circuit. Strong electricity enters and weak electricity comes out.There are many related equipment and more related wires. Therefore, fire prevention is the top priority in lighting work. In the monthly routine inspection, it should be Cooperate with the security department to conduct all inspections of all fire protection equipment and life-saving equipment. The monitoring plan includes the normality of fire-proof equipment, whether the selection of life-saving equipment is normal, whether it is within the warranty period, etc.

In addition to the above inspections, the lighting engineer must have a good understanding of all the equipment and the environment, and please deal with it in time, so as to obtain a good visual environment and have sufficient security.

How to repair LED par light?

1.If the lamp bead is on, but the fan has abnormal noise or no sound, the fan is broken and can be replaced;

2.The lamp bead is on, but the button fails, the motherboard is broken, and the motherboard can be replaced (the channel should be the same);

3.The lamp bead is on, but the LED display on the back is not on, and the button does not respond, indicating that the display board is broken or the cable is off. If the button can change the mode,the LED screen is broken and the main board is not broken.

FAQ

Q1.What is your delivery time?

A:3-5days for sample or small batch orders, 15-30days for mass production

Q2.What is the payment method?

A:T/T,Paypal,WU,Ali Pay.

Q3.How do you guarantee the quality of your products?

A:All Marslite products 100% full test 24hours before goods delivery.

Q4.Are you a factory or a trading company?

A:Manufacturer, with about 100 person in factory.

Q5.Where is your factory?

A:No 195, sandong Road,Huadu Distric ,Guangzhou City, China, very near the Guangzhou Baiyun Airport.

Q6.How long is the product warranty?

A:2 Years Warranty 

Q7.Does your packaging ensure product safety?

A:Marslite will do Drop testing for package to make sure all products is well packed.

Q8.How is your after-sales service?

A:We will give you spare parts and technical support to help you fix the light.