6 eye Laser Wide Moving Head Light Beam RGB 3in1 Laser Moving Head

Product specification

Rated voltage: AC110V/AC230V±10% 

Rated frequency: 50Hz~60Hz 

Rated power: 150W 

Laser power: (red: 200 mw/638 nm, green: 100 mw/520 nm, blue: 200 nm/447 nm) *6 

Laser source: semiconductor laser generator 

Swing angle: 180 degrees on the X axis and 60 degrees on the Y axis can be controlled 

separately. LCD digital display, this program can adjust the positive and negative and 

positive and negative X-axis of each head motor. 

Control channel: 11/26/38/ DMX-512 signal channel optional 

Control signal: international standard DMX-512 signal 

Control mode: DMX-512 signal control, voice control, self-propelled control, 

master-slave synchronization control 

Cooling system: fan forced cooling system 

Working environment: indoor 

Lamp body size: 90*16*25cm

LED moving head light is a new type of product and has a wide range of uses. Its main feature is that it has a computer moving head dyeing light and an LED dyeing light. The projection angle through the lens can be adjusted at any time according to the needs of customers. The smaller the angle, the farther the projection distance, and the more concentrated light can be, the effect of infinite color mixing can be produced. This traditional lamp is incomparable, and it is energy-saving and reliable in quality.

Compared with the traditional LED light panel, the LED moving head light in a new sense now has a high-performance beam sense and a unique kaleidoscope beam effect, which enables it to have a variety of functions. Due to the design of a compact boundary The ingenious design concept of the honeycomb shape enables the LED moving head light to achieve a zoom in a large range of 60 degrees, switching from beam to wash at will, and the rotatable light plate also allows the audience to obtain an unprecedented volume, thus making the color and color temperature. have reached a very high level. Of course, these are not the features of LED moving head light products.

The principle of LED moving head light

The general audience will think that LED dyeing lights are ordinary LED par lights, which are mainly used for the effect of stage dyeing lights, but we know that dyeing lights are not limited to par lights, so the commonly used LED dyeing lights are LED par lights. , LED moving head focusing and dyeing lights, three-in-one beam lights, sky lights, etc., and each has different functions and characteristics, so it is applied to the needs of different scenes on the stage.

Compared with the LED dyeing light, the LED moving head focusing dyeing light can shake the head, and has a strong beam output, and can also provide the effect of color mixing and comprehensive color mixing, and the color is rich. It is mainly used in theater stages, entertainment venues, etc. colorful effect.

Features of LED moving head lights

The control system of LED moving head light In addition, the LED moving head light is also equipped with an unparalleled color point control system, making the lamp based on rgbwLED, because the white chip is added, covering a wide spectrum, which can effectively soften the saturation produced by the red, green and blue chips. 

Thanks to a special software algorithm that allows the LED to simulate the characteristics of a tungsten filament lamp, when zoomed to 4°, the dye lamp becomes a beam luminaire, thus becoming a manipulative effect lamp that controls the running beam, resulting in of micro-ray pulsed beams, so each color and hue can be individually controlled.

The cooling system of the LED moving head light The LED moving head light adopts nineteen big bee eyes cooling system, that is, the heat dissipation method of aluminum substrate and die-casting aluminum plus fan is adopted on the lamp of the moving head light, and the fan can be adjusted by software. Therefore, the temperature of the LED moving head light can always be controlled within a safe and reliable range. 

In order to allow the die-cast aluminum to contact the outside and bring more hot air out of the lamp body, at the air outlet of the lamp head, the die-cast aluminum perimeter is directly exposed, so as to achieve a better heat dissipation effect.

FAQ

Q1.What is your delivery time?

A:3-5days for sample or small batch orders, 15-30days for mass production

Q2.What is the payment method?

A:T/T,Paypal,WU,Ali Pay.

Q3.How do you guarantee the quality of your products?

A:All Marslite products 100% full test 24hours before goods delivery.

Q4.Are you a factory or a trading company?

A:Manufacturer, with about 100 person in factory.

Q5.Where is your factory?

A:No 195, sandong Road,Huadu Distric ,Guangzhou City, China, very near the Guangzhou Baiyun Airport.

Q6.How long is the product warranty?

A:2 Years Warranty 

Q7.Does your packaging ensure product safety?

A:Marslite will do Drop testing for package to make sure all products is well packed.

Q8.How is your after-sales service?

A:We will give you spare parts and technical support to help you fix the light.